Multi-Tech Systems MVP210-SS User Manual download pdf (Page 207)

MultiVOIP User Guide T1 PhoneBook Configuration

207

remote VoIP sites, including non-toll calls completed in the PSTN at the

remote site.

The “Inbound” phonebook for a particular VoIP unit describes the

dialing sequences required for a call to originate remotely from any

other VOIP sites in the system, and to terminate on that particular

VOIP.

Briefly stated, the MultiVOIP’s Outbound phonebook lists the phone stations

it can call; its Inbound phonebook describes the dialing sequences that can be

used to call that MultiVOIP and how those calls will be directed. (Of course,

the phone numbers are not literally “listed” individually, but are,

instead, described by rule.)

Consider two types of calls in the three-city system described above:

(1) calls originating from the Miami office and terminating in the New

York (Manhattan) office, and (2) calls originating from the Miami office

and terminating in New York City but off the company’s premises in an

adjacent area code, an area code different than the company’s office but

still a local call from that office (e.g., Staten Island).

The first type of call requires an entry in the Outbound PhoneBook of

the Miami VOIP and a coordinated entry in the Inbound phonebook of

the New York VOIP. These entries would allow the Miami caller to dial

the New York office as if its phones were extensions on the Miami PBX.

The second type of call similarly requires an entry in the Outbound

PhoneBook of the Miami VOIP and a coordinated entry in the Inbound

Phonebook of the New York VOIP. However, these entries will be

longer and more complicated. Any Miami call to New York City local

numbers will be sent through the VOIP system rather than through the

regular toll public phone system (PSTN). But the phonebook entries

can be arranged so that the VOIP system is transparent to the Miami

user, such that even though that Miami user dials the New York City

local number just as they would through the public phone system, that

call will still be completed through the VOIP system.

This PhoneBook Configuration procedure is brief, but it is followed by

an example case. For many people, the example case may be easier to

grasp than the procedure steps. Configuration is not difficult, but all

phone number sequences and other information must be entered

exactly; otherwise connections will not be made.

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 414 415

No comments

Multi-Tech Systems MVP210-SS User Manual Page 207