Multi-Tech Systems MVP210-SS User Manual download pdf (Page 148)

Technical Configuration MultiVOIP User Guide

148

DID Interface Parameter Definitions (

cont’d)

Field Name Values Description

DID Options (cont’d)

Start Modes Immediate Start,

Wink Start,

Delay Dial

For Wink Start, the voip detects

the off-hook condition. Then

the voip reverses battery

polarity for a specified time

(140-290 ms; a “wink”) and then

becomes ready to receive dial

digits.

For Delay Dial, the voip detects

detects the off-hook condition.

Then the voip reverses battery

polarity for a specified time

(reverse polarity duration has

wider acceptable range than for

Wink Start) and then becomes

ready to receive dial digits.

Wink Timer

(in ms)

integer values,

in milliseconds

This is the length of the wink

for Wink Start and Delay Dial

signaling modes..

Applicable only when Start

Mode parameter is set to “Wink

Start” or “Delay Dial.”

Dialing Options

Inter Digit

Timer

integer values,

in seconds

This is the length of time that

the MultiVOIP will wait

between digits. When the time

expires, the MultiVOIP will

look in the phonebook for the

number entered.

Default = 2.

Message

Waiting

Indication

-- Not applicable to DID-DPO

interface.

Inter-Digit

Regeneration

Timer

integer values,

in milliseconds

This parameter is applicable

when digits are dialed onto a

DID-DPO channel after the

connection has been made. The

length of time between the

outputting of DTMF digits.

Default = 100 ms.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 414 415

Comments to this Manuals

No comments