Multi-Tech Systems MVP210-SS User Manual download pdf (Page 57)

100

101

MultiVOIP User Guide QS: Connectivity Test

4. You now need to free up the COM port connection (currently being

used by the MultiVOIP program) so that the HyperTerminal program

can use it. To do this, you can either (a) click on Connection in the

sidebar and select “Disconnect” from the drop-down box, or (b) close

down the MultiVOIP program altogether.

5. Open the HyperTerminal program.

6. Use HyperTerminal to receive and record console messages from the

MultiVOIP unit. To do so, set up HyperTerminal as follows (setup

shown is for Windows NT4; details will differ slightly in other MS

operating systems):

 In the upper toolbar of the HyperTerminal screen, click on

the Properties button.

 In the “Connect To” tab of the Connection Properties

dialog box, click on the Configure button.

 In the next dialog box, on the “General” tab, set

“Maximum Speed” to 115200 bps.

 On the “Connection” tab, set connection preferences to:

Data bits: 8

Parity: none

Stop bits: 1

 Click OK twice to exit settings dialog boxes.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 414 415

Comments to this Manuals

No comments

Multi-Tech Systems MVP210-SS User Manual Page 57

Comments to this Manuals