Multi-Tech Systems MVP210-SS User Manual download pdf (Page 36)

QS: Phone/IP Starter Config. MultiVOIP User Guide

Phone/IP Starter Configuration (continued)

5. Go to Configuration | Voice/Fax. Select Coder | “Automatic.” At

the right-hand side of the dialog box, click OK. If you know any

specific parameter values that will apply to your system, enter them.

Click Copy Channel. Select Copy to All. Click Copy. At main

Voice/Fax Parameters screen, click OK to exit from the dialog box.

6. Enter telephone system information.

Go to Configuration | Interface.

Enter parameters obtained from

phone company or PBX administrator.

7. Go to Configuration | Regional Parameters. Select the

Country/Region that fits your situation. Click OK and confirm.

Click OK to exit from the dialog box.

8. Go to Configuration | Regional Parameters. In the Country

Selection for Built-In Modem field (drop-down list), select the

country that best fits your situation. (This may not be the same as

your selection for the Country/Region field. The selections in the

Country Selection for Built-In Modem field entail more detailed

groupings of telephony parameters than do the Country/Region

values.)

9. Do you want the phone-call logs produced by the MultiVOIP to be

sent out by email (to your Voip Administrator or someone else)?

If NO, skip to step 11.

If YES, continue with step 10.

10. Go to Configuration | SMTP.

SMTP lets you send phone-call log records to the Voip Administrator

by email. Select Enable SMTP.

You should have already obtained an email address for the

MultiVOIP itself (this serves as the origination email account for

email logs that the MultiVOIP can email out automatically).

Enter this email address in the “Login Name” field.

Type the password for this email account.

Enter the IP address of the email server where the MultiVOIP’s email

account is located in the “Mail Server IP Address” field.

Typically the email log reports are sent to the Voip Administrator

but they can be sent to any email address. Decide where you want

the email logs sent and enter that email address in the “Recipient

Address” field.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 414 415

No comments

Multi-Tech Systems MVP210-SS User Manual Page 36