Multi-Tech Systems MTCBA-C-EN-NX User Manual download pdf (Page 43)

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F) 43

DHCP Server

DHCP Server > Subnet Settings

General Configuration

DHCP (Dynamic Host Configuration Protocol) is a protocol that allows individual devices on an IP network to get

their own network configuration information (IP address, subnet mask, broadcast address, etc.) from a DHCP

server. The overall purpose of DHCP is to make it easier to administer a large network.

DHCP: Enable/disable the DHCP server.

Subnet: Enter the subnet address. For the subnet change, all the ranges have to be deleted;

otherwise, you would not be able to edit the subnet.

Mask: Enter the subnet mask address.

Gateway: Enter the gateway address.

DNS: Enter the DNS address.

Lease Time: Select the DHCP Lease Time from the selection box. Lease time is set in days, hours,

and minutes. A Lease Time of 00-00-00 is an Infinite Lease Time.

Submit Click the Submit button to save these settings. Note: You must click Save and

Restart once you have completed and submitted all the screens on which you have

made changes.

Subnet Settings

From-To Range: Enter the range of IP address for the subnet. For every range, the From and the To

addresses have to be entered in these fields.

Add: Click the Add button. The address range is added and will display in the table at the

bottom of the screen. Once the range displays, you can delete if necessary.

Note: See Appendix A – A Table of Commonly Supported Subnets.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

No comments

Multi-Tech Systems MTCBA-C-EN-NX User Manual Page 43