Multi-Tech Systems MTCBA-C-EN-NX User Manual download pdf (Page 45)

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F) 45

Tools > Service Status

This screen displays the status of each service that is available at run time. The first column lists the services

available at run time; the second column identifies the configuration (enabled/disabled); the third column reports the

current status of each service.

Tools > Firmware Upgrade

Firmware Upgrade

Browse File for Upgrade: Click the Browse button and select the firmware bin file. When found, highlight

the file name and press Enter so that the file name displays in the text box. Make sure you select the correct

BIN file; otherwise, your MTCBA-x-EN can become inoperable. Then click the Upgrade button.

When upgrade is completed, the program will return to the main login screen.

Important Notes:

• Firmware Upgrade is available only when Firmware Upgrade Configuration is enabled on the IP

Setup screen.

• The new firmware is written into the flash.

• A Firmware Upgrade will take at least 3 minutes while the firmware is downloaded. Do not cycle power

during this time.

• DO NOT perform firmware upgrade remotely via the Cellular wireless connection.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

No comments

Multi-Tech Systems MTCBA-C-EN-NX User Manual Page 45