Multi-Tech Systems MTCBA-C-EN-NX User Manual download pdf (Page 20)

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F) 20

Chapter 3 – Using the Web

Management Software

The Web Management software configures the Ethernet functionality of your MultiModem.

Navigating the Web Management Software

This section explains the menu structure and the navigation buttons of the router’s Web Management software.

Menu Bar

IP Setup: Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote Configuration.

PPP: Sets up the PPP authentication, dial-on-demand, modem authentication, and Wakeup on Call.

Networks & Services: Defines networks and services to make them available to other functions such as

allowed packet filters, DHCP Server, and Statistics & Logs.

Packet Filters: Defines filter rules, DNAT configuration, and ICMP rules.

GRE Tunnels: Generic Routing Encapsulation (GRE). Defines the remote network and the tunnel through

which traffic is to be routed.

DHCP Server: Configures the DHCP server settings.

Tools: Sets DDNS Force Update and Reset Modem, displays Service Status, and provides screens for

Firmware Upgrade, Load Configuration, and Save Configuration.

Statistics & Logs: Shows statistics and logs maintained by the modem.

Save & Restart: Saves your settings and reboots your PC.

Help Index: Accesses the online Help text.

IMPORTANT NOTE ABOUT SUBMIT AND SAVE & RESTART

Click the Submit button located at the bottom of most screens in order to save any changes you make.

Then you must click the Save & Restart button, located on the Menu bar, in order for your settings to take effect.

Save & Restart does not have to be executed after each screen; you can change and Submit several screens, and

then click Save & Restart.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

No comments

Multi-Tech Systems MTCBA-C-EN-NX User Manual Page 20