Multi-Tech Systems MTCBA-C-EN-NX User Manual download pdf (Page 12)

Chapter 2 – Getting Started

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F) 12

Set Your PC’s TCP/IP Address for Ethernet

Functionality

After the wireless account is established and the modem is properly connected, it is now time to set up the PC

for the Ethernet functionality. First, you will have to set the TCP/IP address on your PC, if not previously set.

1. Open the PC's Control Panel.

2. Select Networks or Network Connections.

3. Under Protocols, select TCP/IP.

4. Under Properties, choose one of the following:

● Check Obtain IP Address Automatically and Obtain DNS Server Address Automatically. If

you check these, then the DHCP function obtains the IP Address automatically from the Ethernet

wireless modem, or

● Check Use the Following IP Address and Use the Following DNS Server Address. If you

check these, then enter the following addresses:

IP Address: 192.168.2.2

Subnet Mask: 255.255.255.0

Gateway: 192.168.2.1

Specify a DNS Server. For example, 205.171.3.65

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

No comments

Multi-Tech Systems MTCBA-C-EN-NX User Manual Page 12