Multi-Tech Systems MT5600BL User Manual Page 53
- Page / 118
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
4 AT Commands, S-Registers, and Result Codes
45
Command: +MS= Modulation Selection
Values: See description.
Default: See description.
Description: This extended-format command selects modulation and, op-
tionally, enables or disables automode, specifies the lowest and
highest connection rates, selects µ-Law or A-Law codec type,
and specifies the highest transmit rate using one to five
subparameters.
The command format is
+MS=[mod][,[automode][,[min_RX_rate][,[max_RX_rate][,[x_law]
[,[reserved][,[max_TX_rate]]]]]]]<CR>
Subparameters that are not entered retain their current value.
Commas separate optional subparameters, and should be in-
serted to skip a subparameter. Example: +MS=,0,<CR> disables
automode and keeps all other settings at their current values.
+MS? Reports current options in the format
mod,automode,min_RX_rate,max_RX_rate,x_law,reserved,max_TX_rate.
Example: 56,1,300,56000,0,0,33600.
+MS=? Reports supported options in the format (list of supported mod
values),(list of supported automode values),(list of supported
min_RX_rate values),(list of supported max_RX_rate values),
(list of supported x_law values), (list of supported reserved
values),(list of supported max_TX_rate values).
Example: (0,1,2,3,9,10,11,56,64,69),(0,1),(300-33600),(300-
56000),(0,1),(0,1),(300-33600).
Subparameters
mod A decimal number that specifies the preferred modula-
tion (automode enabled) or the modulation to use in originat-
ing or answering a connection (automode disabled). See the
table on the next page.
automode An optional numeric value that enables or disables
automatic modulation negotiation using V.8 bis/V.8 or V.32
bis Annex A. The options are:
0 = Disable automode
1 = Enable automode (default)
min_RX_rate An optional number that specifies the lowest
rate at which the modem may establish a receive connection.
The value is decimal coded in units of bps, e.g., 2400 specifies
the lowest rate to be 2400 bps. See “Possible rates” in the mod
table. The default is 300 for 300 bps.
max_RX_rate An optional number that specifies the highest
rate at which the modem may establish a receive connection.
The value is decimal coded in units of bps, e.g., 28800 specifies
the highest rate to be 28800 bps. See “Possible rates” in the mod
table. The default is 56000, for 56000 bps.
- Model MT5600BA 1
- Model MT5600BL 1
- FCC Part 15 3
- Industry Canada 3
- Chapter 1: Introduction 4
- Chapter 2: Quick Start 4
- Chapter 6: Callback Security 5
- Chapter 8: Solving Problems 5
- Contents 7
- Introduction 10
- Product Description 10
- Features 10
- 1 Introduction 11
- Related Manuals 12
- Quick Start 13
- What You Will Need 14
- Safety Warnings 14
- RS232 Connection 15
- Dialup Connection 15
- Adding the Modem to Windows 17
- Trio DataComm 19
- Windows HyperTerminal 20
- Windows Terminal 21
- Step 5: Send a Fax 22
- References 23
- Using the 25
- Front Panel 25
- Modem Configuration 26
- LED Indicators 26
- Liquid Crystal Display (LCD) 27
- Menu Overview 28
- 3 Using the Front Panel 29
- Status Trunk 29
- Basic Options Trunk 30
- Advanced Options Trunk 31
- Diagnostic Options Trunk 32
- Caller ID Options Trunk 33
- Menu Options 34
- Basic Options 35
- Advanced Options 36
- Remote Configuration Options 37
- Diagnostic Options 38
- Phone Number Memory Options 38
- Caller ID Options 38
- AT Commands 39
- S-Registers & 39
- Result Codes 39
- S-Registers 57
- Configuration 65
- Basic Procedure 66
- 5 Remote Configuration 67
- Callback 69
- Security 69
- AT Command Method 70
- Front Panel Method 71
- At Command Method 71
- Calling Procedure 73
- Callback Security Commands 73
- Callback Assignments 75
- Leased Line 77
- Operation 77
- Two-Wire Setup 78
- Four-Wire Setup 79
- 7 Leased Line Operation 81
- Problems 83
- None of the Indicators Light 84
- 8 Solving Problems 85
- Data Is Being Lost 89
- Appendixes 91
- FCC Part 68 Telecom 92
- Fax Branding Statement 93
- Canadian Limitations Notice 94
- Commission Decision CTR21 94
- A Regulatory Compliance 95
- B Technical Specifications 97
- Appendix C: Loopback Tests 99
- Test procedure 100
- Back-to-Back Test 102
- C Loopback Tests 103
- Technical Support 104
- To Download a File 105
- About the Internet 106
- Ordering Modem Accessories 107
- Upgrade Overview 108
- Multi-Tech Web Site 109
- Multi-Tech BBS 109
- E Upgrading the Modem 111
- Appendix F: Cable Pinouts 112
- Leased Line Pinouts 113
- MultiModemII User Guide 114
Related products and manuals for Fax machines Multi-Tech Systems MT5600BL
(96 pages)© 2020, manymanuals.com. All rights reserved. | 1.529 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals