Multi-Tech Systems MT5600BL User Manual Page 48
- Page / 118
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
MultiModemII User Guide
40
Command: &Q
n
Sync/Async Mode
Values: n = 0–3, 5, 6
Default: 5
Description: This command is an extension of the &M command, and is used
to control which connection modes are permitted. It is used in
conjunction with S36 and S48. (See also the \N command.)
&Q0 Selects direct asynchronous operation. See &M0.
&Q1 Selects synchronous connect mode with asynchronous offline
command mode. See &M1. (Serial interface operation only.)
&Q2 Selects synchronous connect mode with asynchronous offline
command mode and enables DTR dialing of directory 3. See
&M2. (Serial interface operation only.)
&Q3 Selects synchronous connect mode with asynchronous offline
command mode and enables DTR to act as a talk/data switch.
See &M3. (Serial interface operation only.)
&Q5 The modem will try to negotiate an error-corrected link. The
modem can be configured using S36 to determine whether a
failure will result in the modem disconnecting or falling back
to a non-error-correction connection. See also \N3.
&Q6 Selects asynchronous operation with speed buffering and no
error correction. Same as \N0.
Command: &R
n
Clear to Send (CTS) Control
Values: n = 0 or 1
Default: 1
Description: &R0 Let the CTS state follow the RTS state when online..
&R1 Force CTS high (ON).
Command: &S
n
Data Set Ready (DSR) Control
Values: n = 0 or 1
Default: 0
Description: &S0 Force DSR high (on) at all times.
&S1 Let DSR go high only during a connection.
Command: &T
n
V.54 Test Commands
Values: n = 0, 1, 3, 4, 5, 6, 7, or 8
Default: None
Description: The modem can perform selected test and diagnostic functions. A
test can be run only when the modem is in asynchronous op-
eration in non-error-correction mode (normal or direct mode).
For tests 3, 6, and 7, a connection between the two modems
must first be established. To terminate a test in progress, the
escape sequence (+++) must be entered first, except for param-
eters 7 and 8. If S18 is non-zero, a test terminates automatically
after the time specified by S18 and displays the OK message.
&T0 Abort. Stop any test in progress.
&T1 Start local analog loopback, V.54 Loop 3. If a connection exists
when this command is issued, the modem hangs up. A CON-
NECT message is displayed at the start of the test.
&T3 Start local digital loopback, V.54 Loop 2. If no connection exists,
ERROR is returned.
- Model MT5600BA 1
- Model MT5600BL 1
- FCC Part 15 3
- Industry Canada 3
- Chapter 1: Introduction 4
- Chapter 2: Quick Start 4
- Chapter 6: Callback Security 5
- Chapter 8: Solving Problems 5
- Contents 7
- Introduction 10
- Product Description 10
- Features 10
- 1 Introduction 11
- Related Manuals 12
- Quick Start 13
- What You Will Need 14
- Safety Warnings 14
- RS232 Connection 15
- Dialup Connection 15
- Adding the Modem to Windows 17
- Trio DataComm 19
- Windows HyperTerminal 20
- Windows Terminal 21
- Step 5: Send a Fax 22
- References 23
- Using the 25
- Front Panel 25
- Modem Configuration 26
- LED Indicators 26
- Liquid Crystal Display (LCD) 27
- Menu Overview 28
- 3 Using the Front Panel 29
- Status Trunk 29
- Basic Options Trunk 30
- Advanced Options Trunk 31
- Diagnostic Options Trunk 32
- Caller ID Options Trunk 33
- Menu Options 34
- Basic Options 35
- Advanced Options 36
- Remote Configuration Options 37
- Diagnostic Options 38
- Phone Number Memory Options 38
- Caller ID Options 38
- AT Commands 39
- S-Registers & 39
- Result Codes 39
- S-Registers 57
- Configuration 65
- Basic Procedure 66
- 5 Remote Configuration 67
- Callback 69
- Security 69
- AT Command Method 70
- Front Panel Method 71
- At Command Method 71
- Calling Procedure 73
- Callback Security Commands 73
- Callback Assignments 75
- Leased Line 77
- Operation 77
- Two-Wire Setup 78
- Four-Wire Setup 79
- 7 Leased Line Operation 81
- Problems 83
- None of the Indicators Light 84
- 8 Solving Problems 85
- Data Is Being Lost 89
- Appendixes 91
- FCC Part 68 Telecom 92
- Fax Branding Statement 93
- Canadian Limitations Notice 94
- Commission Decision CTR21 94
- A Regulatory Compliance 95
- B Technical Specifications 97
- Appendix C: Loopback Tests 99
- Test procedure 100
- Back-to-Back Test 102
- C Loopback Tests 103
- Technical Support 104
- To Download a File 105
- About the Internet 106
- Ordering Modem Accessories 107
- Upgrade Overview 108
- Multi-Tech Web Site 109
- Multi-Tech BBS 109
- E Upgrading the Modem 111
- Appendix F: Cable Pinouts 112
- Leased Line Pinouts 113
- MultiModemII User Guide 114
Related products and manuals for Fax machines Multi-Tech Systems MT5600BL
(96 pages)© 2020, manymanuals.com. All rights reserved. | 0.246 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals