Multi-Tech Systems MT5600BL User Manual download pdf (Page 60)

MultiModemII User Guide

attempt to deliver data in the buffer until

the connection is lost or the data is delivered.

S46 decimal 136, 138 138 Enables or disables data compression:

136 Error correction without compression.

138 Error correction with compression.

S48 decimal 0, 7, 128 7 Enables or disables LAPM negotiation. An

invalid value is treated as a 128 value.

0 Disables negotiation and proceeds with

LAPM.

7 Enables negotiation.

128 Disables negotiation and proceeds at

once with the fallback action specified

in S36. Can be used to force MNP.

S86 decimal 0, 4, 5, 9, n/a When the modem issues a NO CARRIER

12, 13, 14 result code, a value is written to this register

to help determine the reason for the failed

connection. S86 records the first event that

contributes to a NO CARRIER message. Use

the S86? command to read the value.

0 Normal disconnect; no error occurred.

4 Loss of carrier.

5 V.42 negotiation failed to detect an error-

correction modem at the other end.

9 The modems could not find a common

protocol.

12 Normal disconnect initiated by the

remote modem.

13 Remote modem does not respond after

10 retransmissions of the same message.

14 Protocol violation.

S95 decimal 0–15 0 The bits in this register can be set to over-

ride some of the W command options. A bit

set to a 1 in this register enables the corre-

sponding result code regardless of the W

setting.

Bit 0 CONNECT result code indicates

DCE speed instead of DTE speed.

Bit 1 Append /ARQ to CONNECT XXX

result code in error-correction mode.

Bit 2 Enable CARRIER XXXX result code.

Bit 3 Enable PROTOCOL XXXX result code.

Bit 4 Reserved.

Bit 5 Enable COMPRESSION result code.

Bit 6 Reserved.

Bit 7 Reserved.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 117 118

Comments to this Manuals

No comments

Multi-Tech Systems MT5600BL User Manual Page 60

Comments to this Manuals

Related products and manuals for Fax machines Multi-Tech Systems MT5600BL