Multi-Tech Systems MTASR1-100 User Manual download pdf (Page 20)

RouteFinder MTASR1-100 User Guide

MTASR1-100

Note: Clicking No prevents the defaults from being downloaded to the RouteFinder. You are returned

to the program manager, and in Windows 95/NT you will see an open window with shortcut icons for

all the various utility programs provided in the RouteFinder software.

12. The “Router is Running. Reboot to download setup?” dialog is displayed.

Click Yes.

13. The Novell IPX Protocol Default Setup dialog box is displayed.

Note: To configure your RouteFinder, you will use a series of dialog boxes -- Novell IPX Protocol

Default Setup, IP Protocol Default Setup, and WAN Ports Default Setup.

14. If your network protocol is IPX, continue with the following steps. However, if your network protocol is

IP, click the IPX Routing Enable check box to

disable

IPX, then click OK and proceed to step 19.

15. Router Name: If this is the only RouteFinder on your network, you can use the default Router Name

(MTROUTER); otherwise, you must assign a new Router Name in this field. The Router Name can

be any printable ASCII string of up to 47 characters. The RouteFinder will use this name to advertise

its service in the IPX internetwork.

16. Ethernet: You can enable Auto Learn Ethernet Network Numbers by leaving the default (Yes)

checked, or you can manually assign the network numbers after disabling the Auto Learn option by

clicking No. If no file server is connected to the Ethernet segment, then you should select No.

If you enable Auto Learn, the RouteFinder will learn the IPX network numbers from the file server.

If you disable Auto Learn, record in the space below the network numbers assigned by the network

file server for each of the four frame types [(Raw (802.3), LLC (802.2), EthernetII (Type II), and

SNAP]. Also record the Network number for WAN 1.

RAW (802.3) Frames Network Number _____________

LLC (802.2) Frames Network Number ______________

TYPE_II Frames Network Number _________________

SNAP Frames Network Number ___________________

WAN Network Number _________________________

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 79 80

No comments

Multi-Tech Systems MTASR1-100 User Manual Page 20