Multi-Tech Systems MT128ZLX-ST User Manual download pdf (Page 124)

MultiMobile MT128ZLX User Guide 4: Windows NT API Usage

117

To use the new connection, click on the Dial button. Type in the user name and password for your remote

account. If you are joining a domain, you must also specify the domain name.

Windows NT4 NDIS: Dual Channel Access Example (MultiLink)

NOTE: To install, configure, and remove devices in Windows NT, your logon permissions must include the

ability to load and remove device drivers.

NOTE: To complete this procedure, you will need to know several technical details that can be provided by

your ISP or by your network administrator.

1. You will need to know whether or not an encrypted password is needed to access the network

to which you will be connected.

2. If you are connecting to a non-Windows NT server, you will also need to know in advance

whether or not the server requires you to type in login information or to know TCP/IP addresses

before dialing.

3. If applicable, you will need to know the domain name of the network to which you will be

connected.

4. You will need to know the dial-out network protocol to be used (NetBEUI, TCP/IP, or IPX).

5. You will need to know how to configure your port usage (dial-out calls only, receive calls only,

dial-out and receive calls).

If you would like to use multi-linking with your NDIS connection, first be sure that your ISDN provider

supports a 128kbps MLP option.

1. To begin, you will need to create a new dial-up connection as described above (“Windows NT NDIS :

Single Channel Access Example”) or modify an existing connection. Go to Start | Programs | Accessories

| Dial-Up Networking.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 256 257

No comments

Multi-Tech Systems MT128ZLX-ST User Manual Page 124